такой вывод
c:\PearPC>ppc.exe ppc.txt
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License version 2 as published by
the Free Software Foundation.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111 USA
GenuineIntel
CMOV MMX SSE SSE2 SSE3
[CPU/MMU] new pagetable: sdr1 = 0x00300003
[CPU/MMU] new pagetable: sdr1 accepted
[CPU/MMU] number of pages: 2^15 pagetable_start: 0x00300000 size: 2^18
start: 512
start: 112795648
getStartBlock: 0 Apple_HFS
getStartBlock: 1 Apple_HFS
getStartBlock: 0 Apple_HFS
getStartBlock: 1 Apple_HFS
[IO/PROM] <Error> can't open boot file
c:\PearPC>
Примечание:
ppc.txt - конфиг
## PearPC.net Wiki - wiki.pearpc.net
## PearPC Configuration File
##
## Start Resolution
##
## (clients that use video.x can change the resolution at runtime,
## so this would be used only for starting up)
##
## format: "(width)x(height)x(depth)"
## or "(width)x(height)x(depth)@(frequency)"
##
## depth can only be 15 or 32
##
## default: "800x600x15"
##
#ppc_start_resolution= "800x600x15"
##
## If PearPC is going slow, remove the hash and increase the value. If it feels choppy, remove the hash and
decrease
## the value.
#redraw_interval_msec = 40
## Key codes. to change, remove the hash in front of the lines and change the keycode.
#key_compose_dialog = "F11"
#key_change_cd_0 = "none"
#key_toggle_mouse_grab = "F12"
#key_toggle_full_screen = "Alt+Return"
##
## Boot method
## this can be
## 1. "auto", prom will boot the first bootable partition found (default)
## 2. "select", prom will show you a list of bootable partitions
## 3. "force", prom will load and boot the local file prom_loadfile, only if you boot
## Linux in PearPC after you have installed it.
##
prom_bootmethod = "select"
##
## bootargs: don't change unless you know what you are doing
## machargs: set to "-v" to get a verbose startup. this will
## often fail in Mac OS X 10.2, 10.3 and 10.4.
##
#prom_env_bootargs = ""
prom_env_machargs = ""
##
## This is needed if you want to boot Mac OS X
##
prom_driver_graphic = "video.x"
## This will adjust the position of the initial page table (don't change)
#page_table_pa = 104857600
##
## CPU Config
## Defaults to 0x00088302
## DO NOT change this value unless you are using PearPC 0.4pre!
## 0x00088302 = G3/Standard
## 0x000c0000 = G4/Altivec
##
#cpu_pvr = 0x00088302
##
## Main memory (default 128 MiB)
## must be >= 64 MiB
##
#memory_size=0x8000000
## Drive type will be set according to file extension:
## .img: Harddisk
## .iso: CD-Rom
## Valid drive types are:
## hd: A hdd image should be specified
## e.g. "test/imgs/linux.img"
## cdrom: A cdrom image should be specified
## For Linux or BeOS a cdrom device can be specified as well
## e.g. "/dev/cdrom"
## nativecdrom: The drive (capital) letter of your cdrom device should be
## specified on Microsoft Windows systems e.g. "D:\"
pci_ide0_master_installed = 1
pci_ide0_master_image = "C:\PearPC\iDeneb_disk.img" ## Path to your HD image file
#pci_ide0_master_type = "hd" ## Should ALWAYS be left commented out.
pci_ide0_slave_installed = 1
pci_ide0_slave_image = "C:\PearPC\iDeneb_v1.4_10.5.6.iso" ## Path to your Mac OS X/PowerPC Linux CD-ROM Image
pci_ide0_slave_type = "cdrom" ## Don't comment this out. Should always be "cdrom".
##
## Network
##
pci_3c90x_installed = 0 # For use in Windows. Set value to "1" to activate networking.
pci_3c90x_mac = "de:ad:ca:fe:12:34"
pci_rtl8139_installed = 0 # For use in Linux. Set value to "1" to activate networking.
pci_rtl8139_mac = "de:ad:ca:fe:12:35"
##
## USB
##
pci_usb_installed = 1 ## Fake USB. Should always be activated.
##
## NVRAM
##
nvram_file = "nvram" ## Path to the "nvram" file. Shouldn't be changed.